1. Tube and Pipe Fabricating Tools, Dies and Equipment
   1. Perf-Arc Vertical Tube Piercing Demountable Units
   2. Perf-Arc Self Contained Units
   3. Presses and Accessories
   4. Custom Dies
2. Tube End Forming, Cutoff Dies and Machines
   1. Arc-Fit "Right-Angle" Standard Units
   2. Arc-Twin Standard and Tandem Units
   3. Arc-Twin Hydraulic Self-Contained Machines
   4. Econo Arc-Fit
   5. Arc-Fit "Angular" Units
   6. Arc-Snug "Angular" Units
   7. Mitre-Snug Units
   8. "P" Series Two Blade Cut-Off Dies
   9. "LH" Series Single Blade Cut-Off Dies
   10. "H" Series Hydraulic Cut-Off Machines
3. Corner Notching Tools and Machines
   1. V-Notching Standard Unsupported [Rear Wall Intact]
   2. Custom Side Notch Die
   3. Structural Tool Rods, Angle Iron, Flat Stock and Shapes
   4. Angle Iron "V" Notch and Flat Stock Corner Notch Units
4. Swaging, Jennying and Beading Machines
   1. Beading Machines - Art 278 / 279
   2. Beading Machines - Art 280 / 282
   3. Beading Machines - Art 181 / 281
   4. Seam Folding Machines
   5. Capacity Chart
5. Power or Hand Operated Bending Rolls
   1. Bottom Slip Bending Rolls
   2. Pyramid Bending Rolls
   3. Top Slip Bending Rolls
   4. Tube Forming Bending Rolls
   5. Roll Forming Machines - Art 285 mot / 286 mot
   6. Roll Forming Machines - Art 285 bis / 286 bis
6. Box and Pan Folders and Press Brakes
   1. Bench Mounted Box and Pan Folder
   2. Hydraulic Folding Machines
   3. Mechanical Power Folders
   4. Hand Folding Machines (2 - 4 Metre Capacity)
   5. Hand Folders (24 - 80in Capacity)
   6. Light - Gauge Folding Machines
   7. Bending Machine - Art 288 / 289 bis
7. Guillotine Shears
   1. Linear Cutting Machines
   2. Rotary Cutting Machines
   3. Hand Lever Shearing Machines
   4. Light-Gauge Power Guillotine Shears
   5. Treadle Guillotine Shears
   6. Power Guillotine Shears
8. Circular Shears
   1. Ring and Circle Shear - Art 277 mot
   2. Beading Machines - Art 280 / 282
   3. Beading Machines - Art 300
   4. Beading Machines - Art 303
9. Eccentric Presses
   1. Eccentric Presses - Type EXP
   2. Eccentric Presses - Type PDE
   3. Eccentric Presses - Type PDE
   4. Press Tool Quick Changover System
10. Lathes and Mills
    1. Universal Milling Machines
    2. "C" Series Heavy Duty Centre Lathes
    3. "TC" Series Centre Lathes
    4. "TCX" Series Production Centre Lathes
    5. High Speed Toolroom Lathes
    6. Large Capacity, Heavy Duty Gap Bed Centre Lathes
11. Circular Saws
    1. Manual Circular Saw - Super Brown 350 MRM/MRP
    2. Manual Circular Saw - Brown 300 MRM/MRP
    3. Manual Circular Saw - Perris 350 MRM/MRP
12. Drilling Machines
    1. Astra Drilling Machines
    2. Bench & Pillar Drills
    3. Bench & Pillar Drills (Cont.)
    4. Radial Drilling Machines
13. Other Machines
    1. Grinding, Linishing & Polishing Macines - 8000 Series
    2. Grinding, Linishing & Polishing Macines - 9000 Series
    3. Polishers
    4. Press Brake Tooling
    5. Shear Blades
    6. Vehicle Exhaust Manufacturing Machines
    7. Hand Spinning Lathes

Category: Lathes and Mills

The Mills are designed and built to the highest standards of workmanship required to meet the most exacting requirements of today's production environment. These machines are ideal for use in education, light and heavy engineering.

Lathes cover a wide range, and are suitable for a wide variety of uses ranging from Education to Industrial workshops and production use. A comprehensive range of equipment is included as standard, so these lathes offer extremely good value for money.

Other ancillary products available are - Universal Milling Machines, "C" Series Heavy Duty Centre Lathes, "TC" Series Centre Lathes, "TCX" Series Production Centre Lathes, High Speed Toolroom Lathes and Large Capacity, Heavy Duty Gap Bed Centre Lathes.

Please contact us if you require any more information.

Universal Milling Machines

These milling machines have been designed with present day requirements in mind. They feature strong construction, correct power-weight ratio, ergonomic design, giving ease of handling. These machines are ideal for use in education, light and heavy engineering.

Features -

• Rigid webbed castings with ample dimensions.
• Square prismatic slides which ensure maximum rigidity.
• Spindle, gears and shafts manufactured from Cr.Ni steel are hardened and ground.
• Central lubrication system.
• Minimum wear feature achieved by shaft and gear design.
• Overload clutch on feed boxes.

Standard Equipment -

• Horizontal arbor with collars and draw bar.
• Electrical equipment.
• Coolant pump and fittings.
• Set of spanners.
• Instruction manual.
• Wide range of accessories and options available.

"C" Series Heavy Duty Centre Lathes

The "C" Series of center lathes offer a wide choice of models ranging from 170mm to 267mm center height and 760mm to 3000mm between centers. With a comprehensive range of equipment included as standard, these lathes offer extremely good value for money.

The "C" Series lathes cover a wide range, and are suitable for a wide variety of uses ranging from education to industrial workshops and production use.

Features -

• All castings are properly stabilised and stress relieved bed ways are hardened and ground to min. HB-450.
• Heavy duty castings for rigidity and vibration absorbency.
• Extremely low noise level.
• Foot brake.

"TC" Series Centre Lathes

The "TC" Series of center lathes offer a choice of two models of 180mm and 205mm center height and 1000mm and 1500mm between centers. With a comprehensive range of equipment included as standard, these lathes offer extremely good value for money.

The "TC" lathes feature a single piece base casting giving strength, rigidity and stability even under the most arduous cutting conditions.

The "TC" Series lathes are suitable for a wide variety of uses ranging from education to industrial workshops and production use.

Features -

• All castings are properly stabilised and stress relieved.
• Bed ways are hardened and ground to min. HB-450.
• One piece stand for rigidity and vibration absorbency.
• Extremely low noise level.
• Foot brake.

Standard Equipment -

• Coolant.
• Rear splash and saddle guards.
• Back plate.
• Face plate.
• 3 & 4 jaw chucks.
• Fixed and travelling steadies.
• 4-way toolpost.
• 2 dead centres & centre sleeve.
• Levelling pads & bolts.
• Auto safety stop.
• Halogen light.
• Tool kit & operation manual.
• CE electrics & safety guarding.

Optional Equipment -

• Quick change toolpos with 6 tool holders.
• Taper turning attachment (factory fitted option).
• 5C collet chuck & collets (factory fitted option).
• Dual dials (factory fitted option).
• Digital readout.

"TCX" Series Production Centre Lathes

The "TCX" Series of production centre lathes are designed to meet today's exacting workshop requirements. with a choice of two models of 217mm and 254mm center height and 1000mm and 1500mm between centers, and a comprehensive range of equipment included as standard, these lathes offer extremely good value for money.

The "TCX" Series lathes are designed for production use. The "TCX" series lathes feature adjustable carriage stops with automatic cut out - ideal for repeat work.

Features -

• All castings are properly stabilised and stress relieved.
• Bed ways are hardened and ground to min. HB-450.
• One piece stand for rigidity and vibration absorbency.
• Extremely low noise level.
• Foot brake.

Optional Equipment -

• Quick change toolpost with 6 tool holders.
• Taper turning attachment (factory fitted option).
• 5C collet chuck & collets (factory fitted option).
• Dual dials (factory fitted option).
• Digital readout.

High Speed Toolroom Lathes

This very popular range of high quality, high speed gap bed precision lathes suitable for most small workshop, toolroom & educational work. They offer the discerning user exceptional value for money, with a wide range of accessories, as standard.

These machines have been sold to educational establishments around the world, and in the UK.

Standard Equipment -

• 2HP 1PH / 3HP 3PH main drive motor.
• Rapid foor brake.
• 4-ways tool post.
• Backplate (D1-4).
• Thread dial.
• Gap bed.
• Centers, M.T.No.3.
• Center sleeve m.T. No. 5x3.
• Set of change gears.
• Tool kit & box.
• Complete electric control unit.
• Dual dials.
• 3-jaw scroll chuck 6" (150mm) & back plate.
• 4-jaw independent chuck 8" (200mm) & back plate.
• Face plate 10" (250mm).
• Steady rest.
• Follow rest.
• Rear splash guard.
• 1/8HP coolant pump.
• CE safety guarding including inter-locked chuck guard.

Optional Extras -

• Quick change tool post.
• Single tool post.
• Taper turning attachment.
• Carriage micro stop.
• Live centers MT#3.
• Work lamp.
• Drill chuck 13mm (1/2") w/arbor.
• 4-position carriage stop.
• Milling attachment.

Large Capacity, Heavy Duty Gap Bed Centre Lathes

This series of heavy duty lathes have been designed and developed to provide optimum performance with high cutting power, while providing versatility of use in a wide variety of industries including:- general purpose machine shops, mining, power, paper, steel, rubber & oil industries.

Features -

• The heavy duty series feature; modern design, ease of use, and are built and tested to stringent high accuracy standards (ISO 1708).
• Single piece bed casting.
• Massive heavy duty headstock.
• Removable gap for larger diametres.
• 6-way power feed / rapid feeds.
• Large spindle bores.
• Headstock clutch and brake.

Standard Equipment -

• Combination independent 4 jaw chuck/faceplate.
• 4-way toolpost (indexing every 45 degrees) with t-slot.
• Fixed steady with 3 roller jaws.
• 2 speed tailstock quill for rapid positioning and drilling.
• Automatic lubrication system.
• Thread chasing dial.
• Low volt controls.
• 2 centres.

Optional Equipment -

• Capability to mount rear chuck.
• Optional sizes of fixed steady.
• Travelling steady.
• Taper turning attachment.
• Stop for carriage power feeds.
• Face plate.
• 3-jaw universal chuck.
• Live centre.