1. Tube and Pipe Fabricating Tools, Dies and Equipment
   1. Perf-Arc Vertical Tube Piercing Demountable Units
   2. Perf-Arc Self Contained Units
   3. Presses and Accessories
   4. Custom Dies
2. Tube End Forming, Cutoff Dies and Machines
   1. Arc-Fit "Right-Angle" Standard Units
   2. Arc-Twin Standard and Tandem Units
   3. Arc-Twin Hydraulic Self-Contained Machines
   4. Econo Arc-Fit
   5. Arc-Fit "Angular" Units
   6. Arc-Snug "Angular" Units
   7. Mitre-Snug Units
   8. "P" Series Two Blade Cut-Off Dies
   9. "LH" Series Single Blade Cut-Off Dies
   10. "H" Series Hydraulic Cut-Off Machines
3. Corner Notching Tools and Machines
   1. V-Notching Standard Unsupported [Rear Wall Intact]
   2. Custom Side Notch Die
   3. Structural Tool Rods, Angle Iron, Flat Stock and Shapes
   4. Angle Iron "V" Notch and Flat Stock Corner Notch Units
4. Swaging, Jennying and Beading Machines
   1. Beading Machines - Art 278 / 279
   2. Beading Machines - Art 280 / 282
   3. Beading Machines - Art 181 / 281
   4. Seam Folding Machines
   5. Capacity Chart
5. Power or Hand Operated Bending Rolls
   1. Bottom Slip Bending Rolls
   2. Pyramid Bending Rolls
   3. Top Slip Bending Rolls
   4. Tube Forming Bending Rolls
   5. Roll Forming Machines - Art 285 mot / 286 mot
   6. Roll Forming Machines - Art 285 bis / 286 bis
6. Box and Pan Folders and Press Brakes
   1. Bench Mounted Box and Pan Folder
   2. Hydraulic Folding Machines
   3. Mechanical Power Folders
   4. Hand Folding Machines (2 - 4 Metre Capacity)
   5. Hand Folders (24 - 80in Capacity)
   6. Light - Gauge Folding Machines
   7. Bending Machine - Art 288 / 289 bis
7. Guillotine Shears
   1. Linear Cutting Machines
   2. Rotary Cutting Machines
   3. Hand Lever Shearing Machines
   4. Light-Gauge Power Guillotine Shears
   5. Treadle Guillotine Shears
   6. Power Guillotine Shears
8. Circular Shears
   1. Ring and Circle Shear - Art 277 mot
   2. Beading Machines - Art 280 / 282
   3. Beading Machines - Art 300
   4. Beading Machines - Art 303
9. Eccentric Presses
   1. Eccentric Presses - Type EXP
   2. Eccentric Presses - Type PDE
   3. Eccentric Presses - Type PDE
   4. Press Tool Quick Changover System
10. Lathes and Mills
    1. Universal Milling Machines
    2. "C" Series Heavy Duty Centre Lathes
    3. "TC" Series Centre Lathes
    4. "TCX" Series Production Centre Lathes
    5. High Speed Toolroom Lathes
    6. Large Capacity, Heavy Duty Gap Bed Centre Lathes
11. Circular Saws
    1. Manual Circular Saw - Super Brown 350 MRM/MRP
    2. Manual Circular Saw - Brown 300 MRM/MRP
    3. Manual Circular Saw - Perris 350 MRM/MRP
12. Drilling Machines
    1. Astra Drilling Machines
    2. Bench & Pillar Drills
    3. Bench & Pillar Drills (Cont.)
    4. Radial Drilling Machines
13. Other Machines
    1. Grinding, Linishing & Polishing Macines - 8000 Series
    2. Grinding, Linishing & Polishing Macines - 9000 Series
    3. Polishers
    4. Press Brake Tooling
    5. Shear Blades
    6. Vehicle Exhaust Manufacturing Machines
    7. Hand Spinning Lathes

Category: Guillotine Shears

Guillotines are available in various sizes in power and hand operated models. A guillotine is an invaluable workshop achine, able to cut mild and stainless steel, as well as a multitude of non-ferrous materials.

Other ancillary products available are - Light-Guage Power Guillotine Shears, Power Guillotine Shears, Treadle Guillotine Shears, Hand Lever Shearing Machines Art 308, Linear Cutting Machines and Rotary Cutting Machines.

Please contact us if you require any more information.

Linear Cutting Machines

These Hand Lever Shears are British made with sheffield steel blades.

We also offer spare blades for these machines.

Rotary Cutting Machines

These Hand Lever Shears are for cutting circular and intricate shapes. British made with sheffield steel blades.

We also offer spare blades for these machines.

Hand Lever Shearing Machines

Art 308, Art 308 bis and Art 308 p.s.

Table made of planet cast-iron in a sturdy and strongly ribbed construction. Backstops for parallel and inclined cut, as well as rear gauges for right-angle cut. Adjustment device and spring-type gauges operated by cranking handle and screw. Lever-type sheet holddown, easy to handle. Special steel blades. The lever is well adjusted and balanced for the execution of easy and perfect cuts. The base is rigidly fixed and connected by means of a tie rod.

Light-Gauge Power Guillotine Shears

The Light-Gauge Power Guillotine Shear using Double-edge D2 alloy bldes will shear up to 1.5 metres of 1.6mm mild steel and 1.25 metres of 2mm mild steel. Power is provided by an electric brake motor operated by a foot pedal.

• Front extension arms, front and side squaring guages.
• Manually operated push-pull type back gauge.
• Rear material chute, throat guards and front finger guards.
• Single, continuous and reversable stroking with inching facility for blade setting.

Optional Extras: Electrical Interlocked Rear Safety Guard, Extending Square Guide with Flip Over Stop and Dual Metric / Imperial Scale (1 or 2 metre capacity), Guarding to C.E. Regulations, Strip-line Lighting, Rack and Pinion Parallel Motion Back Gauge with Dual Metric / Imperial Scale, Battery Operated LCD Display for Rack and Pinion Back Gauge (Metric / Imperial display resolution to 0.1mm), Non-standard Electrics and Non-standard Specifications.

Treadle Guillotine Shears

Treadle Guillotine Shears are capable of cutting bothe mild and stainless steel, as well as multiple non-ferrous materials. they have cutting widths from 610mm to 2540mm. They can shear mild steel up to 1.6mm.

• It can shear materials such as; plastics, rubber, fibreboard, printed curcuit boards and fibreglass.
• Double-edged blades.
• Front extension arms.
• Front guage.
• Manually operated push-pull back guage.
• Spring loaded neoprene lined holdown.

Optional Extras: Rack and Pinion Parallel Motion Back Guage with Dual Metric / Imperial Scale, Battery Operated LCD Display for Rack and Pinion Back Guage (Metric / Imperial Display. Resolution to 0.1mm), Extending Square Guide with Flip Over Stop and Dual Metric / Imperial Scale (1 or 2 metre capacity), Strip-line Lighting and Double-edge D2 Alloy Blades.

Power Guillotine Shears

The Power Guillotine is made from an all steel construction giving rigidity and resistance to deflection.

• Low cutting angle produces straight cuts with minimal distortion of cut-offs.
• Few moving parts ensures trouble free operation and minimal maintenance.
• Capable of shearing mild and stainless steel, and a wide range of non-ferrous materials.
• Blade gap adjustment by hand operated levers, with gaduated scales for quick and easy setting (optional on 1500/2, 1000/3 and 1250/3 models).
• Rack and pinion parallel motion back guage with dual metric / imperial guage.
• Front support arms and sliding guage bar stop.
• Clearview hold-down with non-marking gripping pads.
• Single, continous and reversable stroking with inching facility.

Optional Extras: Rear Safety Guard, Lighting, Front Extension Arms, Angle Mitre Guage, Power Back Guage, Programmable Power Back Guage, Extended Squaring Guide, Contact Probe Shearing, Magnetic or Non-Magnetic Sheet Supports, Clutch / Brake Drive and Alternative Specifications.