1. Tube and Pipe Fabricating Tools, Dies and Equipment
   1. Perf-Arc Vertical Tube Piercing Demountable Units
   2. Perf-Arc Self Contained Units
   3. Presses and Accessories
   4. Custom Dies
2. Tube End Forming, Cutoff Dies and Machines
   1. Arc-Fit "Right-Angle" Standard Units
   2. Arc-Twin Standard and Tandem Units
   3. Arc-Twin Hydraulic Self-Contained Machines
   4. Econo Arc-Fit
   5. Arc-Fit "Angular" Units
   6. Arc-Snug "Angular" Units
   7. Mitre-Snug Units
   8. "P" Series Two Blade Cut-Off Dies
   9. "LH" Series Single Blade Cut-Off Dies
   10. "H" Series Hydraulic Cut-Off Machines
3. Corner Notching Tools and Machines
   1. V-Notching Standard Unsupported [Rear Wall Intact]
   2. Custom Side Notch Die
   3. Structural Tool Rods, Angle Iron, Flat Stock and Shapes
   4. Angle Iron "V" Notch and Flat Stock Corner Notch Units
4. Swaging, Jennying and Beading Machines
   1. Beading Machines - Art 278 / 279
   2. Beading Machines - Art 280 / 282
   3. Beading Machines - Art 181 / 281
   4. Seam Folding Machines
   5. Capacity Chart
5. Power or Hand Operated Bending Rolls
   1. Bottom Slip Bending Rolls
   2. Pyramid Bending Rolls
   3. Top Slip Bending Rolls
   4. Tube Forming Bending Rolls
   5. Roll Forming Machines - Art 285 mot / 286 mot
   6. Roll Forming Machines - Art 285 bis / 286 bis
6. Box and Pan Folders and Press Brakes
   1. Bench Mounted Box and Pan Folder
   2. Hydraulic Folding Machines
   3. Mechanical Power Folders
   4. Hand Folding Machines (2 - 4 Metre Capacity)
   5. Hand Folders (24 - 80in Capacity)
   6. Light - Gauge Folding Machines
   7. Bending Machine - Art 288 / 289 bis
7. Guillotine Shears
   1. Linear Cutting Machines
   2. Rotary Cutting Machines
   3. Hand Lever Shearing Machines
   4. Light-Gauge Power Guillotine Shears
   5. Treadle Guillotine Shears
   6. Power Guillotine Shears
8. Circular Shears
   1. Ring and Circle Shear - Art 277 mot
   2. Beading Machines - Art 280 / 282
   3. Beading Machines - Art 300
   4. Beading Machines - Art 303
9. Eccentric Presses
   1. Eccentric Presses - Type EXP
   2. Eccentric Presses - Type PDE
   3. Eccentric Presses - Type PDE
   4. Press Tool Quick Changover System
10. Lathes and Mills
    1. Universal Milling Machines
    2. "C" Series Heavy Duty Centre Lathes
    3. "TC" Series Centre Lathes
    4. "TCX" Series Production Centre Lathes
    5. High Speed Toolroom Lathes
    6. Large Capacity, Heavy Duty Gap Bed Centre Lathes
11. Circular Saws
    1. Manual Circular Saw - Super Brown 350 MRM/MRP
    2. Manual Circular Saw - Brown 300 MRM/MRP
    3. Manual Circular Saw - Perris 350 MRM/MRP
12. Drilling Machines
    1. Astra Drilling Machines
    2. Bench & Pillar Drills
    3. Bench & Pillar Drills (Cont.)
    4. Radial Drilling Machines
13. Other Machines
    1. Grinding, Linishing & Polishing Macines - 8000 Series
    2. Grinding, Linishing & Polishing Macines - 9000 Series
    3. Polishers
    4. Press Brake Tooling
    5. Shear Blades
    6. Vehicle Exhaust Manufacturing Machines
    7. Hand Spinning Lathes

Category: Box and Pan Folders and Press Brakes

The folding machines range includes the types hand operated or motor driven to meet every working requirement. The require no set-up time or skill worker. Ideal for short run or high volume applications.

Other ancillary products available are - Bench Mounted Box and Pan Folders, Hydraulic Folding Machines, Mechanical Power Folders, Hand Folding Machines (2m - 4m Capacity), Hand Folders (24in - 80in Capacity), Light-Guage Folding Machines and Bending Machines - Art 288 / Art 288 bis / Art 289 bis.

Please contact us if you require any more information.

Bench Mounted Box and Pan Folder

This machine is ideal for classrooms, laboratories and workshops, and due to it only weighing 140lbs (63kg) it can be easily transported.

• Vertical and horizontal ajustment of top beam for different material thickness.
• Vertical adjustment of swing beam for radius bends.
• Removable swing beam blade for narrow return bends.

Optional Extras: Floor Stand and Back Guage.

Hydraulic Folding Machines

Hydraulic Folding Machines are available in an extensive range of lengths and bending capacities, in either straight or box and pan designs.

• These machines have powered clamping and folding.
• The workpiece is supported by the machine, rather than the user.
• Auxiliary blde for nrrow return bends.
• Back guage with angular adjustment.
• Adjustable angle of bend stop.
• Requires no set-up or operator skill. 

Optional Extras: Foot Pedal Control, Rack and Pinion Back Guage, Power Back Guage, Fully Automatic Cycle, NC Control, Radius Blades and Alternative Specifications.

Mechanical Power Folders

Mechanical Power Folders feature a hand operated clamping beam and an electrically powered folding beam. the folding beam can be inched up and down, or set to a calibrated angle stop for reptition folds.

• Clamping beam raised from both ends of the machine.
• Self supporting top beam.
• Adjustable swing beam for radius bends.
• Angle stop for reptition bends.
• Back guage with angular adjustment.
• Torsion bars to top and bottom beams.
• Removable angle blade for narrow return bends.
• Easily adjustable top beam for different material thickness.

Available with flat or inclined fingers on Box and Pan models.

Optional Extras: Special Fingers to Customers' requirements, Radius Blade, Rack and Pinion Back Guage and Alternative Specifications.

Hand Folding Machines (2 - 4 Metre Capacity)

These Hand Folding Machines range in width from 610mm to 4000mm, Straight and Box and Pan folders are available. Available with flat or inclined fingers on Box and Pan models. And variations to the standard design can be manufactured.

• Torsion bars to top and bottom beams to ensure accurate folds over the full working length.
• Removable angle blade for narrow return bends.
• Adjustable top beam for different material thicknesses.
• Counter-balanced folding beam.
• Clamping beam raised from both ends of the machine.
• Self supporting top beam.
• Adjustable swing beam for radius bends.
• Angle stop for reptition bends.
• Back guage with angular adjustment.

Optional Extras: Special Fingers to Customers' Requirements, Radius Blades, Rack and Pinion Back Guage, Front Guages with Disappearing Stops, Independent Clamping From Either End of Machine and Alternative Specifications.

Hand Folders (24 - 80in Capacity)

These Hand Folders have many features, including:

• Easily adjustable top beam for different material thickness.
• Removable angle blade for narrow return bends.
• Clamping beam raised from both ends of the machine.
• Self supporting top beam.
• Adjustable swing beam for radius bends.
• Angle stop for reptition bends.
• Back guage with angular adjustment.

Optional Extras: Special Fingers to Customers' Requirements, Radius Blades, Rack and Pinion Back Guage, Bench Stand (only on 24"), Independent Clamping from Either End of Machine and Alternative Specifications.

Light - Gauge Folding Machines

These Light - Gauge Folding Machines are capable of performing a wide range of Straight and Box and Pan folding operations. this is an econoical alternative to other heavier machines.

• Vertical and horizontal adjustment of top beam for different material thickness.
• Vertical adjustment of swing beam for radius bends.
• Removable swing beam blade for narrow return bends.

Optional Extras: Floor Stand (BPFM/24/18 model only), Back Gauge, One Piece Blade and Alternative Specifications.

Bending Machine - Art 288 / 289 bis

Art 288 -

These Bending Machines are built with the criteria of maximum accuracy and sturdiness and can easily be adjusted. The vertical stroke is effected by means of bevel gears and trapezoidal screws; operation is done by a crank-handle. A lockring allows fixing of the table in the desired position.

Standard Equipment: 1 off 45° blade - 1 off 2,5 mm radius blade - 1 off rear gauge - set of spanners.

Extra Accessories: Comb-type adjusting gauge.

Art 288 S -

This machine is the same as the standard Art. 288 but is provided with a clamping device blades made up of single sections. The single sections, which are multiples of 25 mm, are fitted to the upper bar.

Standard Equipment: Set of spanners.

Extra Accessories: 1 off rear gauge - single 45° blade (minimum 24 mm height) length 1020 mm.

Art 289 -

A very modern and sturdily built machine for all bending operations. Vertical movement effected by bevel gears and trapezoidal screws; drive hand-operated by means of a crank-handle. The slewing table is balanced by an adjustable counter-weight in order to make operation very easy. A lock-ring allows fixing of the desired bending angle. The outer side of the base is provided with two cross recesses for the rims which have already been bent. The machines are supplied mounted on a sturdy base.

Standard Equipment: 1 off 45° blade - 1 off 2,5 mm radius blade - 1 off rear gauge - set of spanners.

Extra Accessories: Comb-type adjusting gauge.