1. Tube and Pipe Fabricating Tools, Dies and Equipment
   1. Perf-Arc Vertical Tube Piercing Demountable Units
   2. Perf-Arc Self Contained Units
   3. Presses and Accessories
   4. Custom Dies
2. Tube End Forming, Cutoff Dies and Machines
   1. Arc-Fit "Right-Angle" Standard Units
   2. Arc-Twin Standard and Tandem Units
   3. Arc-Twin Hydraulic Self-Contained Machines
   4. Econo Arc-Fit
   5. Arc-Fit "Angular" Units
   6. Arc-Snug "Angular" Units
   7. Mitre-Snug Units
   8. "P" Series Two Blade Cut-Off Dies
   9. "LH" Series Single Blade Cut-Off Dies
   10. "H" Series Hydraulic Cut-Off Machines
3. Corner Notching Tools and Machines
   1. V-Notching Standard Unsupported [Rear Wall Intact]
   2. Custom Side Notch Die
   3. Structural Tool Rods, Angle Iron, Flat Stock and Shapes
   4. Angle Iron "V" Notch and Flat Stock Corner Notch Units
4. Swaging, Jennying and Beading Machines
   1. Beading Machines - Art 278 / 279
   2. Beading Machines - Art 280 / 282
   3. Beading Machines - Art 181 / 281
   4. Seam Folding Machines
   5. Capacity Chart
5. Power or Hand Operated Bending Rolls
   1. Bottom Slip Bending Rolls
   2. Pyramid Bending Rolls
   3. Top Slip Bending Rolls
   4. Tube Forming Bending Rolls
   5. Roll Forming Machines - Art 285 mot / 286 mot
   6. Roll Forming Machines - Art 285 bis / 286 bis
6. Box and Pan Folders and Press Brakes
   1. Bench Mounted Box and Pan Folder
   2. Hydraulic Folding Machines
   3. Mechanical Power Folders
   4. Hand Folding Machines (2 - 4 Metre Capacity)
   5. Hand Folders (24 - 80in Capacity)
   6. Light - Gauge Folding Machines
   7. Bending Machine - Art 288 / 289 bis
7. Guillotine Shears
   1. Linear Cutting Machines
   2. Rotary Cutting Machines
   3. Hand Lever Shearing Machines
   4. Light-Gauge Power Guillotine Shears
   5. Treadle Guillotine Shears
   6. Power Guillotine Shears
8. Circular Shears
   1. Ring and Circle Shear - Art 277 mot
   2. Beading Machines - Art 280 / 282
   3. Beading Machines - Art 300
   4. Beading Machines - Art 303
9. Eccentric Presses
   1. Eccentric Presses - Type EXP
   2. Eccentric Presses - Type PDE
   3. Eccentric Presses - Type PDE
   4. Press Tool Quick Changover System
10. Lathes and Mills
    1. Universal Milling Machines
    2. "C" Series Heavy Duty Centre Lathes
    3. "TC" Series Centre Lathes
    4. "TCX" Series Production Centre Lathes
    5. High Speed Toolroom Lathes
    6. Large Capacity, Heavy Duty Gap Bed Centre Lathes
11. Circular Saws
    1. Manual Circular Saw - Super Brown 350 MRM/MRP
    2. Manual Circular Saw - Brown 300 MRM/MRP
    3. Manual Circular Saw - Perris 350 MRM/MRP
12. Drilling Machines
    1. Astra Drilling Machines
    2. Bench & Pillar Drills
    3. Bench & Pillar Drills (Cont.)
    4. Radial Drilling Machines
13. Other Machines
    1. Grinding, Linishing & Polishing Macines - 8000 Series
    2. Grinding, Linishing & Polishing Macines - 9000 Series
    3. Polishers
    4. Press Brake Tooling
    5. Shear Blades
    6. Vehicle Exhaust Manufacturing Machines
    7. Hand Spinning Lathes

Category: Power or Hand Operated Bending Rolls

The bending machines range can be hand operated or motor driven. These machines are used for bending large angles across sheet metal to produce cylinders, cones and other circular shapes.

Other ancillary products available are - Bottom Slip Bending Rolls (Hand & Power Operated), Pyramid Bending Rolls (Power Operated), Top Slip Bending Rolls (Hand & Power Operated), Tube Forming Bending Rolls (Hand Operated) and Roll Forming Machines - Art 285 mot / Art 286 mot / Art 285 bis / Art 286 bis.

Please contact us if you require any more information.

Bottom Slip Bending Rolls

Bottom Slip Bending Rolls can be supplied in sizes ranging from 35mm to 127mm in both hand and power operation. They are available in lengths up to 2.5 metres.

• The bottom roll swings out for easy removal.
• Carbon steel rolls give high resistance to deflection.
• Top and back rolls grooved for wired edges.
• Geared drive on 4" and 5" hand machines for easy operation.
• Longitudinal grooves cut in botto roll on 5" machines to assist in aligning.

Optional Extras: Non Standard Roll Lengths, Non Standard Electrics and Coated Rolls.

Pyramid Bending Rolls

The Pyramid Bending Rolls features driven bottom rolls and a free running top roll with manual vertical adjustment. The pyramid design provides a large bending capacity in relation to the roll diameters, whilst the all steel fabricated construction ensures long term rigidity, accurate forming and trouble free operation.

• Pyrmid formation enbles production of infinite diameter cylinders.
• Drop end frame with counterbalanced top roll to enable removal of cylinders.
• Carbon steel rolls give high resistance to deflection.
• Longitudinal grooves in bottom rolls to assist in alignment and grip.
• Top roll height scales for accurate setting.

Optional Extras: Hardened or Coated Rolls, Cone Rolling Attachment, Variable Speed Drive and Alternative Specifications.

Top Slip Bending Rolls

Top Slip Bending Rolls can be supplied in sizes ranging from 35mm to 127mm in both hand and power operation. They are available in lengths up to 2.5 metres.

• Top Slip formation enables production of infinate diameter cylinders.
• Counterbalanced top roll swings out for easy removal of closed cylinders.
• Carbon steel rolls give high resistance to deflection.
• Workpiece clamped and released by single movement of clamping lever.
• Back roll adjusted from front of machine with numerical indicators of position for accurate setting (optional on TSR/2 and TSR/3 models).
• Top and bottom rolls driven.
• Geared drive on TSR/4 and TSR/5 models (optional on TSR/2 and TSR/3 models).
• Bottom and back rolls grooved for wired edges.
• Longitudinal grooves on TSR/5 to assist alignment and grip.
• Back roll can be tilted to enable production of cones (when fitted with attachment).

Optional Extras: Parallel Motion to Back Roll, Drive to Back Roll, Cone Rolling Attachment, Hardened or Coated Rolls and Alternative Specifications.

Tube Forming Bending Rolls

These machines have small diameter rolls suitable for rolling thin guages and soft material. Roll diameters fro 12mm to 35mm are available and roll lengths can be varied to suit any application. The material is formed around the top roll which is held in tension at one end. Upon removal of link arm the roll lifts upwards enabling the formed tube to be removed.

Optional Extras: Hardened or Coated Rolls.

Roll Forming Machines - Art 285 mot / 286 mot

These Roll Forming Machines feature three asymmetrically arranged rolls, driven by electric motor. The lower roll can be adjusted by means of a cam lever, the rear roll is adjusted by a handwheel for the execution of cylindrical and conical bendings; at their ends, both rolls are provoded with grooves, having different widths and dephts, in order to bend beaded sheets or iron rods. The upper roll, which can be disengaged, is provided with a longitudinal groove for bending the edges of sheets to be jointed. The rollers run on self-lubricating bushings. Control is effected by foot-pedal for operating the electromagnetic switches of the electric equipment having low-voltage circuits. The minimum diameter obtainable at maximum sheet thickness corresponds to two or three times the diameter of the upper roll. The machines are provided with accident-prevention stop device.

Extra Accessories: Hardened and ground shafts - cones unit - back cylinder motor-driven traverse - back cylinder traverse display - speed variator.

Roll Forming Machines - Art 285 bis / 286 bis

This Roll Forming Machine features 3 hand-operated rolls. Upper roll can be disengaged; it is provided with a longitudinal groove for bending of the ends that are to be jointed. Also conical forming is possible. lower and rear roll are provided with grooves for rolling beaded pieces or iron rods. It can be adjusted to make tubes of different diameters. The minimum diameter obtainable at maximum sheet thickness corresponds to two or three times the diameter of the upper roll.

On request the machine can be supplied without base.