High Precision Metal Spinning Machines and Hand Lathes.
 
Swaging, Jennying and Beading Machine - art. 181

These machines are built using the same technology as the machine tools and they represent the best equipment, that is available on the market. All shafts are made of hardened and tempered steel, they are ground and run on self-lubricating bushings so to permet high work speeds. The variator drive enables adjustents of the work speed to any requirement.
Three different models are built, a version with short shafts (C), with medium shafts (M) and with long shafts (L).

Optional:

  • Special rollers.
  • Cutting rollers.
  • Pneumatic control cylinder for upper shaft -Turnover guide.
  • Disc cutting device
  • 3-speed gearbox either with or without clutch
  • D.C. motor.
 
Specification
Model ZODIAC/C ZODIAC/M ZODIAC/L
distance between center shafts - mm 65 65 65
groove depth in centre of rolls - mm 200 250 300
for sheet thickness R = 40 kg/mm^2 up to - mm 1.8 1.5 1.2
working speeds - standard m/min 7/35 7/35 7/35

working speed: on request m/min

 4/22 4/22 4/22
horsepower of motor 0.75 0.75 0.75
maximum diametre of disc (for 181/bis) - mm 650 650 650
weight - circa kg 150 150 150
Model ORION/C ORION/M ORION/L
distance between center shafts - mm 86 86 86
groove depth in centre of rolls - mm 280 350 410
for sheet thickness R = 40 kg/mm^2 up to - mm 2.5 2.2 1.9
working speeds - standard m/min 6/40 6/40 6/40

working speed: on request m/min

 4/27 4/27 4/27
horsepower of motor 1.5 1.5 1.5
maximum diametre of disc (for 181/bis) - mm 1000 1000 1000
weight - circa kg 340 345 350

 
Swaging, Jennying and Beading Machine - art. 278

Hand-operated machines, indispensable for all beading operations required by tinsmith. They are very sturdy machines and offer a carefull finish, having milled gears and ground shafts.

Standard equipment:

  • 7 roller pairs for beading.
  • 1 roller pair for cutting.
  • 2 guides.
  • 1 service spanner.
 
Specification
Model LYRA ULM LUCAS
distance between center shafts - mm 35 43 46
groove depth in centre of rolls - mm 120 150 170
for sheet thickness R = 40 kg/mm^2 up to - mm 0.4 0.5 0.6
rolls - pairs 8 8 8

weight - kg

 14 17 22

 
Swaging, Jennying and Beading Machine - art. 279

Hand-operated machines, indispensable for all beading operations required by tinsmith. They are very sturdy machines and offer a carefull finish, having milled gears and ground shafts.

Standard equipment:

  • 7 roller pairs for beading.
  • 1 roller pair for cutting.
  • 2 guides.
  • 1 service spanner.
 
Specification
Model RIGI GILES CIVES
distance between center shafts - mm 48 56 65
groove depth in centre of rolls - mm 210 260 320
for sheet thickness R = 40 kg/mm^2 up to - mm 0.8 1 1.5
rolls - pairs 8 8 8

weight - kg

 30 50 70
Please note this information is just an example of the product range available, please contact us for information relating to your specific requirements.