Guillotine Shear Range.
 
Hand Shears

 
 
Specification
CAPACITY
MODEL
 
5RP-10
3R-7
3R-5
Thickness Mild Steel
7mm
4mm
4mm
Length
90mm
200mm
125mm
Dia. Bar
16mm
7mm
7mm
Sq. Bar
13mm
-
-
Equal Angle
50 x 6mm
-
-
Tee Section
50 x 6mm
-
-

 
ASTS

An inexpensive foot operated treadle shear, popular in schools. It provides a simple and accurate method of cutting up to 1.6mm mild steel and equivalent tensile strength materials. A bar type hold down grips the material and is returned with the treadle by a gas spring. Guarded for safety, it is supplied complete with front and back gauge.

Standard Equipment

  • 600mm simple push/pull back gauge
  • Two front arms support arms and bar
  • Side squaring strips
  • 2 edged blades suitable for mild and stainless steel
  • Treadle spring

Optional Extras

  • Rear guard to confirm with ‘CE’ standards for Europe.
 
Specification
Cutting Length
mm
1260
Thickness Mild Steel
mm
1.6
Thickness Stainless Steel
mm
1
Bed Width
mm
260
Bed Height
mm
800
Back Gauge Range
mm
0-600
Length x Width x Height
mm
1371x838x1117
Shipping Case Size
mm
1473x940x1270
Nett/Gross Weight
kg
373/436

 

 
RGM

Standard Equipment

  • Electrics 415V 50Hz 3Ph
  • Shear blades from tough and wear resistant alloyed material machined with four cutting edges
  • Foot pedal suitable for both single and repetitive cutting
  • 800mm squaring arm with scale
  • Front support arms and front gauge
  • 600mm manual backgauge system working on ballscrews with + 0.5mm precision
  • Safety system conforming to European CE norms


Optional Equipment

  • Power backgauge with digital readout control and stroke counter (+ 0.1mm precision)
  • Pneumatic rear sheet support system
  • Squaring arm and front support arms other than standard length
  • Angle gauge
  • Work table with filler plates and ball transfer
  • Special paint colours
 
Specification
Model Number Shear Capacity Motor Power kW Strokes per minute Cutting Length mm Back Gauge Range Overall Dimensions Case Size mm Approx Weight Kg
< 450N /mm2 < 700N/ mm2 L W H L W H
RGM 1260x3 3 1.5 3 40 1240 600 1910 1560 1250 2110 1610 1460 1420
RGM 1560x3.5 3.5 1.5 5.5 40 1540 600 2110 1560 1250 2310 1610 1460 1620
RGM 2060x4 4 2 7.5 38 2040 600 2610 1560 1250 2810 1610 1460 2320
RGM 2560x4 4 2 7.5 38 2540 600 3110 1560 1250 3310 1610 1460 2820
RGM 3100x3 3 1.5 7.5 35 3130 600 3700 1560 1250 3900 1610 1460 3450

 

 
HSG 6mm Shears

Features

  • Robust Swing Beam design working on high precision, self-aligning roller bearings
  • Rapid Blade Gap Adjustment
  • Low maintenance hydraulics located underneath the bed
  • Hydraulic clamping
  • Footswitch control
  • 2 Front Support Arms
  • Side Squaring Arm with scale and flip stops
  • Shadow Line Lighting
  • 750mm Power Back Gauge, accurate to 0.1mm, with ‘Go To’ Controller
  • Stroke Control
  • Swing-up Back Gauge to allow long lengths to be cut
 
Specification
MODEL HSG 2100/6 HSG 2600/6 HSG 3100/6 HSG 4100/6
Shearing - Mild Steel mm 6 6 6 6
Capacity   Stainless mm 4 4 4 4
Motor Power kW 11 11 11 11
Holdowns pcs 13 14 16 22
Strokes per min 18 18 14 10
Oil Tank Capacity Lt 160 160 160 160
A mm 2260 2760 3260 4310
B mmm 430 430 430 430
C mm 1225 1225 1275 1440
D mm 480 480 480 480
E - Rear Guard mm 900 900 900 900
G mm 800 800 800 800
H mm 1510 1510 1510 1580
Nett Weight kg 3700 4100 5400 7000

 
BHG Shears

Features

  • Robust Swing Beam design working on high precision, self-aligning roller bearings
  • Rapid Blade Gap Adjustment
  • Low maintenance hydraulics located underneath the bed
  • Hydraulic clamping
  • Footswitch control
  • 2 Front Support Arms
  • Side Squaring Arm with scale and flip stops
  • Shadow Line Lighting
  • 750mm Power Back Gauge, accurate to 0.1mm, with ‘Go To’ Controller
  • Stroke Control
  • Swing-up Back Gauge to allow long lengths to be cut
 
Specification
                     
MODEL BHG 2600x10 BHG 2600x12 BHG 2600x16 BHG 2600x20 BHG 3100x10 BHG 3100x12 BHG 3100x16 BHG 3100x20 BHG 4100x10 BHG 4100x12
Shearing - Mild Steel mm 10 12 16 20 10 12 16 20 10 12
Capacity   Stainless mm 6 8 10 12 6 8 10 12 6 8
Motor Power kW 22 30 30 37 22 30 30 37 22 30
Holdowns pcs 14 14 14 16 16 16 16 18 20 20
Strokes per min 16 20 12 7 14 18 10 6 10 14
Oil Tank Capacity Lt 150 200 220 280 170 220 220 280 170 220
Nett Weight kg 7800 9000 12000 14200 8350 10250 13500 16000 11500 13500
A mm 2900 2960 3020 3150 3400 3460 3520 3650 4400 4460
B mm 420 420 420 420 420 420 420 420 420 420
C mm 1650 1790 2020 2050 1650 1790 2020 2050 17500 1890
D mm 500 500 400 400 500 500 400 400 400 400
E mm 300 200 - - 300 200 - - 300 200
G mm 800 800 900 900 800 800 900 900 800 800
H mm 1850 1960 2100 2750 1850 1960 2200 2800 1890 2000

Accessories

Back Gauges

  • Manual rack and pinion with rule.
  • Power operated leadscrew – 750mm.
  • Front operated by push buttons mounted in the panel.
  • Metric readout as standard, imperial available.
  • Dual speed operation available. 1000mm optional – sheet support recommended.
  • ‘Go To’ LED positioning controller extra to the power operated back gauge, fitted instead of the standard readout, providing pre-set accurate dimensioning with backlash compensation.

Front Support Arms

  • Standard 1M from the blades. Extra lengths available for front shearing, fitted with disappearing stops.

Side Squaring Arms

  • A basic butt square is fitted as standard to the bed of the shear. Extra lengths available with 2 swing stops and rule.

Quadrant Side Gauge

  • For angle shearing. This may reduce the working length of the machine.

Rear Guard

  • This guard complies with the ‘CE’ directive and is a statutory requirement in Europe. It is electrically interlocked to prevent operation of the machine.

 		 

Fluorescent Lighting of the cutting line.

Shear Blades

  • Stainless quality blades are fitted as standard. Besides offering a re-grind service, we also carry a large stock of the popular sizes for shears made during the last 20 years.

Electrics

  • 380/415/3/50 hz. Fitted as standard. Other international supplies available upon request.

Paint colours

  • Grey and red as standard. Machines can be painted to customers’ colours upon request.

Sheet support

  •        
  • Air operated support for use with thin or long material.

Installation or Commission & Instruction

  • On the safe use and maintenance of your guillotine. We recommend that our Engineers check the level and blade gap prior to operation, after transportation. We can quote for this service which normally takes a full working day once the machine is in position and an electrical supply provided.
Please note this information is just an example of the product range available, please contact us for information relating to your specific requirements.